You are here: Technical > Product Options

Product Options

Product Option Categories

LED Emergency Ciruit Options (AC)

Emergency Circuit - onsite AC or DC emergency power circuit is provided
Onsite Emergency (AC) generator power is provided via a separate circuit to the fixture.
LED driver wired directly to 120VAC or 277VAC emergency power feed. No DC battery pack in fixture. Two (2) AC power feeds exit the fixture. #1 Fixture AC power, #2 emergency AC power. LED lamp/s are "ON" only during an emergency condition.
Most products featuring LED come available with EC options. Check with the product spec-sheet for which EC can be used with a particular fixture.

LED EMERGENCY CIRCUIT OPTIONS (AC)
EC1A One (1) 5W LED Emergency Light. LED driver wired directly to 120VAC Emergency Power Feed.
EC2A  One (1) 5W LED Emergency Light. LED driver wired directly to 277VAC Emergency Power Feed.
EC3A Two (2) 5W LED Emergency Lights. LED driver wired directly to 120VAC Emergency Power Feed.
EC4A Two (2) 5W LED Emergency Lights. LED driver wired directly to 277VAC Emergency Power Feed.
ECXA OTHER
  ► Back to Top



LED Emergency Ciruit Options (DC)

Emergency Circuit - onsite AC or DC emergency power circuit is provided
Onsite Emergency (DC) generator power is provided via a separate circuit to the fixture.
LED driver wired directly to 12VDC or 24VDC emergency power feed. No DC battery pack in fixture. Two (2) power feeds exit the fixture. #1 Fixture AC power, #2 emergency DC power. LED lamp/s are "ON" only during an emergency condition.
Most products featuring LED come available with EC options. Check with the product spec-sheet for which EC can be used with a particular fixture.

LED EMERGENCY CIRCUIT OPTIONS (DC)
EC1D One (1) 5W LED Emergency Light. LED driver wired directly to 12VDC Emergency Power Feed.
EC2D  One (1) 5W LED Emergency Light. LED driver wired directly to 24VDC Emergency Power Feed.
EC3D Two (2) 5W LED Emergency Lights. LED driver wired directly to 12VDC Emergency Power Feed.
EC4D Two (2) 5W LED Emergency Lights. LED driver wired directly to 24VDC Emergency Power Feed.
ECXD OTHER
  ► Back to Top



LED Emergency Battery Pack Options

Emergency Pack - NO onsite AC or DC emergency power circuit is provided
No onsite Emergency (AC or DC) power is provided via a separate circuit to the fixture.
LED light/s are wired directly to emergency battery pack in fixture. No LED driver used.
One (1) AC power feed exits the fixture
LED lamp/s are "ON" only during an emergency condition.
Most products featuring LED come available with LED EM options. Check with the product spec-sheet for which EM can be used with a particular fixture.

LED EMERGENCY BATTERY PACK OPTIONS
EM1 One (1) 5W LED Emergency Light. LED driver wired directly to Battery Pack. 120VAC Power Feed.
EM2  One (1) 5W LED Emergency Light. LED driver wired directly to Battery Pack. 120VAC Power Feed.
EM3 Two (2) 5W LED Emergency Lights. LED driver wired directly to Battery Pack. 277VAC Power Feed.
EM4 Two (2) 5W LED Emergency Lights. LED driver wired directly to Battery Pack. 277VAC Power Feed.
 EMX OTHER
  ► Back to Top



LED Integral Emergency Battery Pack Options

Emergency Pack - NO onsite AC or DC emergency power circuit is provided
No onsite Emergency (AC or DC) power is provided via a separate circuit to the fixture.
LED light/s are wired directly to emergency battery pack LED Driver.
One (1) AC power feed exits the fixture
Emergency LED lamp/s used are already a part of the fixture light source.
No additional emergency LED Lamp/s are installed inside fixture.
Emergency Wattage cannot exceed fixture wattage.
LED lamp/s are "ON" constantly (24/7).
Most products featuring LED come available with LED EL options. Check with the product spec-sheet for which EC can be used with a particular fixture.

LED EMERGENCY BATTERY PACK OPTIONS
EL60 Integral Emergency Battery, LED 7W, Up to 420 Lumens (by IOTA), LED Driver Wired Directly to Battery Pack*
EL61 Integral Emergency Battery, LED 12W, Up to 720 Lumens (by IOTA), LED Driver Wired Directly to Battery Pack*
EL63 Integral Emergency Battery, LED 23W, Up to 1290 Lumens (by BODINE), LED Driver Wired Directly to Battery Pack*
EL67 Integral Emergency Battery, LED 23W, Up to 1290 Lumens (by IOTA), LED Driver Wired Directly to Battery Pack*
EL69 Integral Emergency Battery, LED 23W, Up to 1290 Lumens (by IOTA), LED Driver Wired Directly to Battery Pack*
EL82 Integral Emergency Battery, LED 4W, +/-240 Lumens (by FULHAM), LED Driver Wired Directly to Battery Pack*
EL83 Integral Emergency Battery, LED 20W, +/-1200 Lumens (by FULHAM), LED Driver Wired Directly to Battery Pack*
* Specify Fixture Voltage: 120V or 277V Power Feed: A=120V or B=277V (ie. EL67A - 120V; EL67B - 270V)
NOTE: Incorporating into Fixtures, Photocells, Motion Sensors, or Manual Switches may create additional Power Feeds exiting from the fixture. Also, additional site wiring may be required.
► Back to Top



Dimming Ballasts / Driver Options

Dimming ballasts and drivers can be used in conjunction with motion sensors to help control lighting efficiency and provide energy management. Numerous fixtures in our catalog are available with Dimming Ballasts/Drivers and/or Motion Sensor options. Check with the product spec-sheet for which ones can be used with a particular fixture.

DIMMING BALLASTS / DRIVERS OPTIONS
D1 Dimming Ballast for Linear Fluorescent - Specify Type:
A=2-WIRE; B=3-WIRE; C=0-10V
D2 Linear Fluorescent Step Dimming for T8 Lamp - Specify Type:
A=2-STEP (100%-50%); B=3-STEP (100%-65%-35%)
D3 Dimming Ballast for Compact Fluorescent - Specify Type:
A=2-WIRE; B=3-WIRE; C=0-10V
D4 LUMISTEP Dimming Ballast for Ceramic Metal Halide Cosmopolis Lamp - Specify:
6=6 HRS; 8=8 HRS; 12=12 HRS
D5 50-100% Wattage Dimming with 0-10V Control for Ceramic Metal Halide Elite Lamp
D6 QL Induction 50% Step Dimming
D7 0-10V Low-Voltage LED Dimming (100-30% Standard - Consult Factory for Other)
D8 LED Forward Phase/Leading Edge Dimming Ballast (TRIAC) - Consult Factory
D9 LED Reverse Phase/Trailing Edge ELV Dimming Ballast - Consult Factory
D10 Linear Fluorescent Step Dimming for T5 Lamp - Specify Type:
A=2-STEP (100%-50%); B=3-STEP (100%-65%-35%)
D11 DALI LED Dimming Driver - Consult Factory
D12 LUTRON Dimming Driver - Consult Factory
D13 LED Step Dimming
D14 DMX - Lighting Control Protocol
  ► Back to Top



Motion Sensor Options

Dimming ballasts and drivers can be used in conjunction with motion sensors to help control lighting efficiency and provide energy management. Numerous fixtures in our catalog are available with Dimming Ballasts/Drivers and/or Motion Sensor options. Check with the product spec-sheet for which ones can be used with a particular fixture.

MOTION SENSOR OPTIONS
MSE Motion Sensor External
Single Circuit-All On, All Off - White (WH) or Bronze (BZ) - Requires BB
MSE2 Motion Sensor External
Dual Circuit-Half On, Half Off - White (WH) or Bronze (BZ) - Requires BB
MSI Motion Sensor Integral
Single Circuit-All On, All Off
MSI2 Motion Sensor Integral
Dual Circuit-Half On, Half Off
SWIT0011 = WHITE ONLY
Motion Sensor Integral (MSI)
Range: Up to 10 feet when mounted at 8 feet above ground
May require Backbox (depending on fixture)
 SWIT0016-BZ = BRONZE
Motion Sensor External (MSE) / Wet Locations
Range: Up to 45 feet when mounted at 8ft height
SWIT0018 = WHITE
Motion Sensor External (MSE) / Wet Locations
Range: Up to 45 feet when mounted at 8 feet height
SWIT0027 = WHITE
Motion Sensor External (MSE) / Wet Locations
Interchangeable Lenses
LENS0003 Range: Mounted at 8 feet high, up to 44 feet Diameter
LENS0001 Range: Mounted at 20 feet high, up to 40 feet Diameter
SWIT0030/31 = WHITE
Motion Sensor External (MSE) / Wet Locations
SWIT0030 Range: Mounted at 20 feet high, up to 40 feet Diameter
SWIT0031 Range: Mounted at 40 feet high, up to 60 feet Diameter 
  ► Back to Top



Fluorescent Integral Emergency Battery Packs

The Fluorescent Integral Emergency Ballast Backup System (EL) is an internal-based battery option built into the fixture. The EL option can be used in numerous types of luminaire installations. Check the product spec-sheet to see if the option is included for a particular fixture. Download a copy of our Emergency Battery Options List which features illustrations that help demonstrate various mounting types and their associated REL applications as well as the options charts listed below.

Download: Emergency Battery Options

FLUORESCENT INTEGRAL EMERGENCY BATTERY PACKS
EL1 Integral Emergency Battery, Up to 600 Lumens, T8, 1 Lamp 17W-32W
Dimensions: 2.4" x 9.4" x 1.5"
EL2  Integral Emergency Battery, Up to 650 Lumens, DTT, TTT, 1-2 Lamps 6W-42W, 4PIN
Dimensions: 2.4" x 9.4" x 1.5"
EL7 Integral Emergency Battery, Up to 1400 Lumens, T8, DTT, TTT, 1 Lamp; 17W-215W; 2 Lamp 17W-40W; Dimensions: 2.4" x 13.3" x 1.5" 
EL9 Integral Emergency Battery, Up to 1400 Lumens, T8, DTT, TTT, 1 Lamp; 17W-215W; 2 Lamp 17W-40W; Dimensions: 2.4" x 13.4" x 1.5" 
 EL14 Integral Emergency Battery, Up to 750 Lumens, TT/DTT/TTT, 1 Lamp 13W-42W; 4PIN; Dimensions: 2.4" x 9.4" x 1.5" 
 EL31 Integral Emergency Battery, Up to 700 Lumens, T5, T5HO, T8, T8HO, 1 Lamp 14W-55W; Dimensions: 1.18" x 18.5" 1.18" 
 EL32 Integral Emergency Battery, Up to 1325 Lumens, T5, T5HO, T8, T8HO, 1 Lamp 14W-55W; Dimensions: 1.18" x 21.5" x 1.18" 
 EL35 Integral Emergency Battery, Cold Weather, Up to 1250 Lumens, TT/DTT/TTT, 1 Lamp 13W-42W; Dimensions: 2.6" x 9.4" x 1.5" 
 EL44 Integral Emergency Battery, Cold Weather, Up to 1300 Lumens, TT/DTT/TTT, 1 Lamp 13W-70W, 2 Lamps 13W-32W; Dimensions: 2.6" x 13.4" x 1.5"
 EL49 Integral Emergency Battery, Cold Weather, Up to 1200 Lumens, T8, 1 Lamp 17W-215W, 2 Lamps 17W-40W; Dimensions: 2.6" x 13.4" x 1.5" 
 EL52 Integral Emergency Battery, Cold Weather, Up to 1250 Lumens, TT/DTT/TTT, 1 Lamp 13W-70W, 2 Lamps 13W-32W; Dimensions: 5.5" x 6" x 1.6"
  ► Back to Top



Fluorescent Remote Emergency Battery Packs

The Fluorescent Remote Emergency Ballast Backup System (REL) is a surface mount only battery option separate of the fixture. The REL option can be used in numerous types of luminaire installations. Check the product spec-sheet to see if the option is included for a particular fixture. Download a copy of our Emergency Battery Options List which features illustrations that help demonstrate various mounting types and their associated REL applications as well as the options charts listed below.

Download: Emergency Battery Options

FLUORESCENT REMOTE EMERGENCY BATTERY PACKS
REL2 Remote Emergency Battery, TTT; 1-2 Lamp; 650 Lumens
REL35 Remote Emergency Battery - Cold Weather TTT; 1-2 Lamp; 1250 Lumens
REL52 Remote Emergency Battery - Cold Weather TTT; 1-2 Lamp; 1300 Lumens
REL61 Remote Emergency Battery; LED 12W, Approximately 720 Lumens (IOTA)
REL63 Remote Emergency Battery; LED 23W, Approximately 1290 Lumens (BODINE)
REL67 Remote Emergency Battery; LED Cold Weather 23W, Approximately 1290 Lumens (IOTA) 
 REL82 Remote: LED 4W (Fulham) - Factory Recommended
 REL85 Remote: LED 20w (Fulham) - Factory Recommended 
 REL88 Remote: LED 16W (Fulham) - Factory Recommended
  ► Back to Top



Additional LED / Fluorescent Options

Programmable ballasts, bi-level lighting options, and programmable surge protection can help control luminaire efficacy and performance for cost-savings and extend lamp life. Numerous fixtures in our catalog are available with these options. Check with the product spec-sheet for which ones can be used with a particular fixture.

LED / FLUORESCENT OPTIONS
PRS PROGRAMMABLE RAPID START BALLAST
(Fluorescent Only)
BL DUAL CIRCUIT FOR BI-LEVEL LIGHT
(High/Low - Includes 2EBU)
SG 10KV SURGE PROTECTION
(ANSI: C62.41.2) FOR LED FIXTURES
  ► Back to Top